manualshive.com logo in svg

easyRAID NAS easyRAID FN-420GT, Operation Manual

Share
Download
easyRAID NAS easyRAID FN-420GT Operation Manual Download Page 41

 

 

-40-                      easyRAID NAS FN-420GT Operation Manual 

This page provides tools to configure the easyRAID 420GT to monitor [APC 
Back-UPS ES 500(RS232) and Smart series] device.   

• 

UPS Watch : This radio button group enables/disables UPS watch function of 
the system.   

• 

UPS Selection : The system supports [APC Back-UPS ES 500(RS232) and 
Smart series].   

• 

Time to shutdown : If the UPS watch option is enabled, the default delay of 
shutdown is 5 minutes. Otherwise, the system will be shutdown immediately 
when a power loss has been detected.   

• 

Detailed Watch : If this option has been set to "Yes", the system will shutdown 
automatically if remaining battery charge falls below 5% on UPS or battery 
runtime is below 5 minutes on UPS, which either comes first.   

• 

Send message to connecting clients : If this option has been set to "Yes", the 
system will send message to connecting clients when each power event has 
been detected.   

• 

Update : The system saves all changes if this button is pressed.   

• 

Cancel : The system skips all the modifications if this button is pressed.   

 
3-4-10 System Firmware Upgrade 

 
The firmware upgrade screen of the system is shown in figure 3-16. 
 

 

Figure 3-16 Firmware Upgrade 

 
The administrator may acquire the latest version of firmware and save to a local HDD. 
By using this menu option, provide the file location to the system and complete 
firmware upgrade. 
Please contact your local dealer regular to acquire the latest version of firmware.   
The file will be in a form that looks like “1.01k-NAS System.bin”. Locate the file using 
the Browse button and click “OK”. It will update the firmware automatically and when 
completed, the unit will ask you to reboot. 

Summary of Contents for easyRAID FN-420GT

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands