manualshive.com logo in svg

EASYPRINT Compact 32D, Product Manual, Page: 69 / 243

Share
Download
EASYPRINT Compact 32D Product Manual Download Page 69

DESCRIPTION AND INSTALLATION

25364 Issue 8 March 2018

2-49

(5) Ensure that the print head is in the fully retracted position by manually 

adjusting if necessary. Normally this is achieved automatically when 
the cassette is removed with the power on and the printer has the 
status ‘Printer open’.

(6) Fit the cassette to the printer.

(7) Push the latch closed to lock it.

CAUTION:

If the latch is forced closed before the cassette is 
fully inserted it may become damaged.

(8) Press the reset button. The printer initialises.

Note:

If an audible clicking or banging noise is heard during 
calibration, the ribbon is threaded incorrectly. Remove the 
cassette to halt the calibration. Review the ribbon path 
diagrams, then repeat the ribbon threading procedure until the 
noise stops.

Summary of Contents for Compact 32D




















































































































































































































































Reviews:

No comments