EASYPRINT Compact 32D Product Manual Download Page 41

Page: 41 / 243

DESCRIPTION AND INSTALLATION

25364 Issue 8 March 2018

2-21

Communicator II Pin Allocations

Name

Type

Default Function

J3 Pins

Colours

Output 1

Volt-free

contacts

Ready / Returning

4, 12

Orange - Light

Green

Output 2

Volt-free

contacts

Error

3, 11

Red - Pink

Input 1

NPN

Encoder

(duplicated on

5-pin DIN)

8, 15

Purple - Red /

White

Input 2

Volt-free

contacts

Start Signal

5, 13

Yellow - Black /

White

The function of each output can be changed in the software - the defaults

are listed in the table, see

page 2-28

for descriptions.

For more information regarding configuration of inputs and outputs,

see

“Inputs/Outputs” on page 3-52.

By default Output 1 and 2 are volt free contacts, they can be changed to

NPN contacts by:

(1) Open the I/O box by removing the 2 screws on the connector side.

(2) Set JP2 and JP3 to position 2-3.

Note:

If the outputs need to be changed back to volt free contacts, set
JP2 and JP3 to position 1-2.

Summary of Contents for Compact 32D




















































































































































































































































Search results

Summary of Contents for Compact 32D

Reviews:

EASYPRINT Compact 32D, Product Manual, Page: 41 / 243

Search results

Summary of Contents for Compact 32D

Reviews: