ElEmENtS Of tHE CHIlD CAR SEAt
1. Head restraint
2. Belt guide for groups ii and iii
3. Shoulder belt covers
4. Insert for a small child
5. Shoulder straps
6. Central seat belt buckle
7. Crotch strap
8. Belt pretensioner button
9. Tensioner belt
10. Seat tilt adjustment lever
11. Seat rotation adjustment button
12. Isofix connectors release button
13. Top tether strap loop
14. Isofix connectors
15. Belt guide for groups ii and iii
16. Top tether strap
17. Shoulder belts clip
18. Child safety seat belts buckle
OPERAtING INStRUCtIONS
PlACING tHE CHIlD IN tHE CHIlD SAfEty SEAt
Loosen the 5-point car seat belts by pushing the belt tensioner button and pull
the shoulder straps downwards (fig. 1). Do not pull the belt covers. Press the
button on the central buckle and disconnect the straps (fig. 2). Place the child in
the seat and adjust the height of the headrest by pulling the adjuster at the top of
the headrest (fig. 3). The height adjustment of the headrest is integrated with the
height adjustment of the shoulder straps. Adjust the height so that the shoulder
strap holes are slightly above the child’s shoulders (Fig. 4). Connect the shoulder
strap buckles and attach them to the central buckle (Fig. 5). Tighten the shoulder
straps by pulling the belt from the tensioner so that the straps fit the child but
do not press the child down (Fig. 6).
SEAt tIlt ADJUStmENt
The seat has 4 tilt positions. Positions 1 - 3 can be set when the seat is installed
forward-facing. Position 4 is for group 0+/I (0 - 18 kg) when rearward-facing.
To change position, pull the tilt adjustment lever (fig. 7).
MoUntinG tHe seat For GroUP 0+ (0-13 KG) anD GroUP i (9-18 KG)
Install the car seat on a seat equipped with ISOFIX system hooks and Top Tether
strap fixing point (detailed information should be provided in the car manual).
Press the rotation adjustment button and position the seat backwards (fig. 8).
Tilt the seat to the lying position. Press the Isofix connectors release buttons and
push them as far as possible (fig. 9). Press the Isofix connectors on the connectors
between the backrest and the seat of the car seat (fig. 10). You should hear
a characteristic click (fig. 11). The lights on the Isofix connectors should be green.
Make sure that the seat is correctly fastened. Then secure the seat with the Top
Tether strap by guiding it through the silver guides on the siteof the backrest on
both sides (Figures 12, 13) and fixing its hook to the handle at the back of the
backrest or in the storage area (Figures 14, 15). If the belt needs to be extended,
press the length adjustment button (fig. 16). The green light will be visible. When
the hook is fastened, pull the strap by pulling the short end. A red light will be
visible (fig. 17).
MoUntinG tHe seat For GroUP ii (15-25 KG) anD GroUP iii (22-36 KG)
For group II and III children, the seat must be installed forward-facing using ISOFIX
in conjunction with 3-point car belts or with 3-point car belts alone.
Before starting the installation, remove the 5-point seat belts, the child restraint
insert and the cushion (fig. 18). To remove the 5-point belts, remove them from the
buckles at the back of the backrest (Figures 19A, 19B).
If you are installing the seat using Isofix, push the buttons to release the Isofix
connectors and push them as far as possible (fig. 9). Press the Isofix connectors
against the attachments between the backrest and the car seat. You should hear
a characteristic click (fig. 20). The lights on the Isofix connectors should be green.
Make sure that the seat is correctly fastened. You can additionally secure the
seat with the Top Tether strap by attaching its hook to the handle located at the
back of the backrest or in the storage area (Figures 14, 15). If the belt needs to be
extended, press the length adjustment button (fig. 16). A green light will appear.
When the hook is fastened, pull the strap by pulling the short end. A red light will
be visible (fig. 17). Then sit your child down and secure the child together with
the seat with the 3-point car belt by guiding them through the appropriate loops.
Insert the car belt tongue into the correct buckle (fig. 21). Make sure the lap belt
is as close as possible to the child’s hips and the shoulder belt halfway between
the neck and shoulder.
en
en
16
17
