INSTALLATION AND CONNECTION
8
Step 2: Connect the video connector with the BNC jack of the 20M cable to the video-in connector of the DVR. Then,
connect the converter to the DC19V jack of the DVR.
2.4 DVR Power-Up
Item Needed
Power adapter x 1
Power Connection
This device should be operated only with the type of power source indicated on the manufacturer’s label.
Connect the power adapter to the DC-DC Converter, and plug into an electrical outlet.
The “POWER” LED on the DVR will be on as red. Press the “POWER” button, and the “POWER” LED will be on as green.
It takes approximately 10 to 15 seconds to boot the DVR system.