INSTALLATION AND CONNECTION
6
toward the direction of the lens for easy installation.
Step 4: Connect the BNC jack and the power connector to the 20M cable through the power and video line hole drilled in
advance. Then hide the video cable to the other side of the ceiling.
Step 5: Adjust the camera angle and the Sun Shield position. After that, secure the joint lock to fix.
2.2 DVR HDD Installation
(Take Model 2 as an example)
The HDDs must be installed before the DVR is turned on. For detailed installation instructions, please see the following
instructions.
Step 1: Loose the screws on the upper cover and open the upper cover of the DVR.
Step 2: Remove the HDD bracket.
Step 3: Get a compatible SATA HDD, and connect it to the power connector and data bus connector (make sure to align
the HDD precisely for pin connection).
