INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Easco Boiler Corp 1175 Leggett Ave Bronx, NY 1047 T: 718.378.3000 F: 718.378.4560 [email protected] easco.com
Page 10 of 46
SECTION 2: REQUIREMENTS
2.1 Installation and Service Qualification
Equipment to be installed, which is covered by this Manual, should be designed for
installation by an experienced and competent Licensed Design Professional Engineer,
and further, should be installed by a competent, qualified and, where mandated by
Local Jurisdiction, Licensed Mechanical, Heating and/or HVAC Contractor to assure
the proper and safe design, handling, installation, commissioning, operation, care and
continued maintenance of the Equipment.
Servicing of this Equipment should only be undertaken by competent and qualified
service personnel who are, regularly engaged in such services, fully trained, and
thoroughly familiar with same equipment, system application, ancillary support
systems, and accompanying Installation, Operation and Maintenance Manuals, and
Procedures, provided with the Equipment to assure the proper and safe commissioning,
operation, care and continued maintenance of the Equipment.
When applicable, competent, qualified and/or, where mandated by Local Jurisdiction,
Licensed Electrical and/or Plumbing Contractors and Water Quality Service Providers
may be required to perform such installation and/or service procedures, as deemed
necessary, to assure the proper and safe installation, commissioning, operation, care
and continued maintenance of the Equipment.
2.2 Operation, Care and Continued Maintenance Qualification
Operation, care and continued maintenance of this Equipment should only be
undertaken by competent, qualified and, where mandated by Local Jurisdiction,
Licensed Operating Personnel who are, regularly engaged in such services. They should
be fully trained, and thoroughly familiar with same equipment, system application,
ancillary support systems, and accompanying Installation, Operation and Maintenance
Manuals, and Procedures, provided with the Equipment to assure the proper and safe
commissioning, operation, care and continued maintenance of the Equipment.
When applicable, competent, qualified and/or, where mandated by Local Jurisdiction,
Licensed Mechanical, Heating, HVAC, Electrical, Plumbing, Authorized Repair
Contractors and Water Quality Service Providers, may be required to perform such
services and/or maintenance procedures, as deemed necessary.
2.3 Codes, Standards, Local Jurisdictions and Utilities
This Equipment must be installed in accordance with any, and all, applicable Codes and
Standards of most current approved and/or accepted Editions, governing the design,
handling, installation, commissioning, operation, care and continued maintenance of
such equipment including those Codes and Standards and Specification requirements
which are mandated by Local Jurisdictions, and/or Utilities, having authority.
Local Jurisdictions, and/or Utilities, having authority should be consulted prior to
installation to assure applicable Codes and Standards compliance.
