INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Easco Boiler Corp 1175 Leggett Ave Bronx, NY 1047 T: 718.378.3000 F: 718.378.4560 [email protected] easco.com
Page 2 of 46
PREFACE AND STATEMENTS
EASCO Boiler Corp. (EASCO) is committed to providing equipment of lasting quality and
value to each of its many customers. It is our goal that every piece of EASCO equipment
(Equipment) purchased provides the same reliable operating excellence that was built into it
by skilled craftsmen at our EASCO factory (Factory).
The following Installation, Operation and Maintenance Manual (Manual) is designed to help
you properly install, operate and care for your Equipment. We recommend that you read the
Manual through to familiarize yourself with its contents before installing and operating your
Equipment.
Due to a wide variety of ever-changing state and local codes, the Manual contains information
designed to show how a basic unit operates. The operation of all Equipment must comply
with all applicable regulations and codes by any authorities having jurisdiction. The legal
requirements take precedence over anything contained herein. At EASCO, engineering
research and development toward product improvements are a continuing process; therefore,
the specific information in this book may be subject to change without notice.
Every EASCO boiler (Boiler) has been designed and manufactured to produce a long lifetime
of dependable efficient service. All components of Equipment were chosen for their ability to
enhance this design goal. Although these components provide high degree of protection and
safety during normal operating conditions, we highly advise that you pay close attention to
any Notes, Cautions and Warnings and maintain an awareness of the Hazards and Dangers
inherent in careful handling of Equipment.
In our many years in business, we have found that two things alone greatly impact the
dependable operation and long life of our Equipment:
• operator responsibility and knowledge
• consistent preventive maintenance
Operator Responsibility
It is the operator’s responsibility to provide the daily care and attention required to properly
maintaining your EASCO boiler room equipment. This Manual is intended to act as a
guide and reference source for those operations, but it cannot replace the keen eye and
experienced touch of a trained boiler room operator. It is recommended that a boiler room
log be maintained to record daily, weekly, monthly and yearly activities as well as any
unusual occurrences.
Consistent Preventive Maintenance
Regular effective maintenance is the best way to obtain the most efficient operation of your
EASCO boiler room equipment. We have found that the life and efficiency of Equipment
are dependent upon the consistency of care it receives. Often efficient operation is a
matter of keeping the Boiler clean and the firing equipment property regulated. With proper
installation, regular care and the use of genuine EASCO renewal parts, your quality EASCO
equipment will last indefinitely.