INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Easco Boiler Corp 1175 Leggett Ave Bronx, NY 1047 T: 718.378.3000 F: 718.378.4560 [email protected] easco.com
Page 5 of 46
IMPORTANT INFORMATION
This Installation, Operation and Maintenance Manual (Manual) has been prepared for the
purpose of assisting design, installation, operating, maintenance, and service personnel.
The information contained herein is therefore general, in order to adequately address
most, if not all, design specification requirements, Federal, State and Local Jurisdictional,
Utility and Insurance underwriter requirements and applicable Codes and Standards
of the most current approved and/or accepted Editions. It is of utmost importance and
concern that all personnel responsible for the proper and safe design, handling, installation,
commissioning, operation, care and continued maintenance of this Equipment are
thoroughly familiar with the Equipment, system application and ancillary support systems,
accompanying installation, operation and maintenance manuals and procedures (Manuals
and Procedures), provided with the Boiler. Please read this Manual to become thoroughly
familiar, and knowledgeable, prior to engaging in such activities.
WARNING!!
I
mproper design, handling, installation, commissioning, operation, care,
maintenance and service of the Equipment, and ancillary support systems, can create
a potential hazard to equipment, operating personnel and building occupants resulting
in serious equipment and/or property damage, personal injury and/or death. Boilers,
fuel burning and handling equipment, components, ancillary device and equipments
must be maintained and operated only by competent and qualified operating and
service personnel, who are fully trained, and thoroughly familiar, with same equipment,
system application and ancillary support systems, and accompanying Manuals and
Procedures, provided with the Equipment.
WARNING!!
Do NOT attempt restart of the Equipment unless the failure, or manual
reset, condition that occurred is thoroughly investigated and the cause of it identified,
and fully corrected, prior to restart. Service to Boilers, fuel burning and handling
equipment, components, ancillary device and equipment, must be performed only by
competent and qualified service personnel.
1. This Boiler has a Limited Warranty.
2. Prior to installation of this Equipment, this Manual shall be read and thoroughly
understood by those responsible for such installation requirements. Maintain a copy of
the Manual, at or about the Equipment, for ready reference by personnel responsible
for the proper and safe design, handling, installation, commissioning, operation, care
continued maintenance of the Equipment.
3. All heating systems should be designed by an experienced and competent Licensed
Design Professional Engineer, and further, should be installed by a competent, qualified
and, where mandated by Local Jurisdiction, Licensed Mechanical, Heating and/or HVAC
Contractor to assure the proper and safe design, handling, installation, commissioning,
operation, care and continued maintenance of the Equipment. Servicing of this
Equipment should only be undertaken by competent and qualified service personnel
who are, regularly engaged in such services, fully trained, and thoroughly familiar, with
the same equipment, system application, ancillary support systems, and accompanying
Manuals and Procedures, provided with the Equipment to assure the proper and safe
