background image

 
 

ELECTRIC SLIMLINE COMBINATION BOILER 

   (Patent Pending, Design Right Protected.) 

 

TSL9/140U & TSL9/170U  

 

TSL12/140U & TSL12/170U  

SOLAR COMPATIBLE 

 

This product is suitable for connection to ~230-240V, 50Hz 

 

INSTRUCTIONS FOR USE, INSTALLATION AND 

SERVICING 

TO BE LEFT WITH THE USER 

 

The instructions consist of three parts; 

User

Installation

 and 

Servicing

 instructions, which include the guarantee 

registration card.  
 
The instructions are an integral part of the appliance and must, to comply with the current issue of the building, electrical 
regulations and water by-laws, be handed to the user on completion of the installation. 
 

GUARANTEE REGISTRATION 

Thank you for installing a new Thermal Innovations product in your home. 
 
Thermal innovations appliances, are manufactured to the very highest standards so we are pleased to offer our 
customers, a comprehensive first year parts & Labour guarantee and a second year parts guarantee. 
 
In the instruction envelope is to be found your guarantee registration card, which must be completed and returned to 
Thermal Innovations (UK) Ltd or register your Thermal Innovations (UK) Ltd appliance for 1st year guarantee protection by 
calling the below number. 
 
Our guarantee gives you peace of mind valuable protection against breakdown by covering the cost of- 

• 

All replacement parts 

• 

All labour charges 

• 

All call-out charges 

 
 
 

THERMAL INNOVATIONS (UK) LTD 

31-39 Napier Court, Cumbernauld, Glasgow, G68 0LG 
 

Customer services 
Tel  

+44 (0) 870 850 5207 

Fax 

+44 (0) 870 850 5208 

Web www.thermaflowheating.co.uk 

 

Issue Number: 1a   Issue date: July 2008 

 

Copyright Notice 

This document contains proprietary information protected by copyright, and this Manual and documentation are copyrighted. All rights are reserved. No part 
of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form without permission from Thermal Innovations 
(UK) Ltd. 

©

 Copyright Thermal Innovations (UK) Ltd 2006-09 -All rights reserved. 

Summary of Contents for TSL12/140U

































Reviews: