MAIN MENU
Pressing the MNU (menu) pushbutton displays the main menu
screen. The functions are listed below.
SET
– Go to the SETUP MENU.
LOG
– Selects the log menu or event screen (if the daily display is disabled).
ALL
– View all enabled scale remaining or gross values on one screen.
ESC
– Return to the main, single channel weight screen.
If no selection is made within three-seconds, the screen returns to the weight display screen.
Pressing the MNU (menu) pushbutton displays the main menu
screen. The functions are listed below.
CFG
– Configuration – Adjust Pxxx parameters…
CAL
– Calibrate the scales and the 4-20mA outputs. Also, diagnostic screens are available
under this menu selection.
RTC
– View/set the clock (real-time clock)
ESC
– Return to the main, single channel weight screen.
If no selection is made within three-seconds, the screen returns to the weight display screen.
VIEWING ALL WEIGHT VALUES ON ONE SCREEN
MAIN MENU
SET LOG ALL ESC
SETUP MENU
CFG CAL RTC ESC
G 0.0 R 150.0
R 75.0 G 0.0
If more than one channel is enabled, a screen that displays all
channels is available. Press the MNU pushbutton and then press
the ALL pushbutton. The weight values displayed for each channel
can be either gross or remaining weights. The G/R (gross/remaining) selection is made via
the individual channel screens. Pressing any pushbutton exits this screen and returns to the
last single channel screen that was selected. If channel four is not enabled, an ESC
pushbutton label is displayed.
LOG MENU
If the daily option is enabled (see parameters P920, etc.), there are
two log screens available, which are the event and daily logs. If the
daily option is disabled, pressing the LOG pushbutton will enter the
event log.
EVENT
– View the date, time, and event for the last 128 events.
DAILY
– View the daily usage for the last 31-days.
ESC
– Return to the main, single channel weight screen.
LOG MENU
EVENT DAILY ESC