34
Group L (UltraMap Only)
This group has a digital depth display along with
the sonar alarms setting in the upper left corner
of the screen. (See the sonar section for more
information on the sonar alarms.) A quarter-size
sonar screen shows in the upper right corner.
Surface water temperature shows in the lower
left corner of the screen, both digital and a tem-
perature graph. Water speed and a second tem-
perature show in the bottom right corner of the screen. (Note: Speed and
water temperature on this screen comes from an optional speed/tem-
perature sensor. The TEMP 2 display requires an optional TS-2BK tem-
perature sensor.
Reprogram Boxes
The digital boxes on MAP 2 and both NAV screens can be reprogrammed,
changing the informations shown by the boxes.
To customize a screen, first switch to the screen
that you want to customize. Map-2 (shown at right)
is used in this example. Next, press the MENU
key, then select the “Reprogram Boxes” menu.
The screen shown below appears.
This is the MAP-2 edit screen. The “BRG” box
near the left corner flashes, which means it’s
ready for change. If you don’t want to change this
box, simply press the up or down arrow key to move to the box that you do
want to change. In this example, we will change the bearing (BRG) box to
ground speed (GS). To do this, simply press the left or right arrow key
while the box is flashing. The box changes each time the arrow key is
pressed. When the desired box appears, then you can change another
Group M (UltraMap Only)
This screen has digital depth, half-screen sonar,
water speed, and surface water temperature dis-
plays.
Summary of Contents for AccuMap
Page 1: ...INSTALLATION AND OPERATION INSTRUCTIONS AccuMap and UltraMap TM TM ...
Page 6: ...Notes ...
Page 90: ...84 Notes ...
