Product Manual Rosa Thermostat
EAE KNX Rosa Thermostat
Rosa Thermostat PM R1.0
©
EAE Technology
www.eaetechnology.com
Page27 / 77
4.2.1.3.2
Communication Objects
No
Object Name
Function
Data Type
Flags
1
Rocker1-shutter
UP/DOWN
Up/Down
1 bit
DPT 1.008
CWT
This communication object will be used to start blind movement.
2
Rocker1 –
STOP/Lamella adj.
Stop/Lamella adj.
1 bit
DPT 1.002
CWT
When “Control Type” parameter is “Shutter/Venetian Blind” this communication object is used to stop
movement of blind and adjust lamella position, otherwise when “Control Type” parameter is
“Blind/Roller/Awning” only used for stopping blind movement.
3
Rocker1-Top
Position
True/False
1 bit
DPT 1.002
CWT
This communication object should be linked to an appropriate group address that will be used to detect
whether blind is at “Top Position” (True) or not (False).
4
Rocker1-Bottom
Position
True/False
1 bit
DPT 1.002
CWT
This communication object should be linked to an appropriate group address that will be used to detect
whether blind is at “Bottom Position” (True) or not (False).
Table 12
4.2.1.4 Value Operation
Figure 7
Rocker buttons can be configured to send predefined values from different data types. Values selected for
both rocker buttons will be transmitted over the same communication object.4.2.1.4.1
