Installation, Operation and Parts Manual
EE-62CE-60T
18
Step 10: Connect electrical system.
Electrical connection must be done by qualified electricians.
Check that the supply voltage is adapted to the voltage of the lift. Connect electrical wires referring to the following wire connection
scheme.
1. Mount the control box on to the power side post.
2. Fix max lifting height limit switch onto the inside surface of the main post and connect its wire to the corresponding terminals in the
control box.
1.post
2.control box
3.hex socket cylinder head screw M6x15
1. Limit switch
2. Cross socket flat head screw M5x10
3. Cross socket flat head screw M5x10
4. Wire
