Installation, Operation and Parts Manual
EE-62CE-60T
26
S/N
Components
Methods
Period
7
Unloading valve
Inspect if the valve leaks or not. Clean or change the valve if it
leaks.
Every day
8
Steel cable
Check the synchronization of both carriages and adjust the
tightness of the cable if desynchronization is unacceptable.
Every day
9
Bushing of the upside pulley and
circlip of the shaft
Lubricate the bushing with NO.1 lithium based grease.
Check if the circlip is in its original position.
Every 3
months
10
Steel cable
Lubricate the cable with NO.1 lithium based grease.
Change with new steel cables every 3 years or ten single wires
have broken.
Every 3
months
11
Running track inside the post for
carriages
Lubricate track with NO.1 lithium based grease.
No obstruction on the track.
Every 3
months
12
Chain and its pins
(Not applicable )
Lubricate the chain with NO.1 lithium based grease.
Change the chains every 3 years or if any cracks occurred to the
pin of the chain.
Every 3
months
13
Bushing of the downside pulley
and circlip of the shaft
Lubricate the bushing with NO.1 lithium based grease.
Check if the circlip is in its original position.
Every 3
months
14
Expansion bolts
Check with torque spanner.
For M18 bolt ,the torque is no less than 80N.m
Every 3
months
Whole Lift
Running the lift for several cycles with and without rated load.
The lift can run steadily and smoothly with no abnormal noise.
Every 3
months
16
Bushing of the upside pulley and
circlip of the shaft
Lock the carriage and slacken the steel cable and dismantle the
pulley assembly. Measure the abrasive clearance and change the
bushing if the clearance is bigger than 0.5mm.
Every year
17
Bushing of the downside pulley
and circlip of the shaft
Lock the carriage and slacken the steel cable and dismantle the
pulley assembly .Measure the abrasive clearance and change the
bushing if the clearance is bigger than 0.5mm.
Every year
18
Hydraulic oil
Change the oil 6 months after initial use and once per year
thereafter. Inspect and change the oil if it becomes black or
there is dirt in the oil tank.
Every year
If users stick to the above maintenance requirements, the lift will always keep a good working condition
and its service life could be extended.
