![background image](http://html.mh-extra.com/html/e-mu/eii/eii_owners-manual_518543106.webp)
PRESET DEFINITION MODULE
© 1985, 1986, 1987 E-mu Systems, Inc. Page 106
11 - GET VOICE
This fetches the specified Voice from a Library disk and loads it into the Bank.
Application:
Before creating Presets, you must load the Voices that make up the Preset(s) into
the Bank.
1. With the module active, key in 11. The display says:
Get Voice __
(01 – 99)/Slider A
..and the ENTER light will be flashing. Either use the keypad to specify the Voice File to
be loaded, or move Slider A to catalog (see GENERAL INSTRUCTIONS 7) the Voice
Files available for loading. When the display shows the desired Voice, press ENTER.
2. The display now says:
FXX (Voice Name)
Into Voice VV
...where XX is the two-digit Voice file number (see GENERAL INSTRUCTIONS 4 on
Library disk Voice numbering protocol), and VV is the lowest-numbered Voice number
available in the Bank. The display will always default to the lowest available Bank Voice
number. To assign this number to the Voice, press ENTER. To assign a different Voice
number, use the keypad and then press ENTER.
3. The disk drive will whirr for a bit and load the Voice file into the Bank. After loading, the
Module Identifier appears.
Summary of Contents for EII+
