![background image](http://html.mh-extra.com/html/e-mu/eii/eii_owners-manual_518543187.webp)
SEQUENCER MODULE
© 1985, 1986, 1987 E-mu Systems, Inc. Page 187
RECORD, PLAY and STOP
You can think of these three switches as the “tape recorder controls” since they act very
similarly to the equivalent controls on a multi-track tape recorder.
Record
To record a Sequence, first press RECORD to put the Sequencer in “record ready”
mode. Then, press PLAY to begin recording. If you programmed a countdown
(SEQUENCER SETUP 6), the number of beats you programmed will elapse before
recording begins. Note that unlike a tape recorder, you do not need to hold down
RECORD as you press PLAY.
Two cautions: A Sequence must play through to the end for a track to be recorded; if you
stop a Sequence while it’s recording by pressing STOP, what you just played will not be
recorded. Also, note that upon pressing RECORD and PLAY any existing note data on
the track will be erased.
Playback
To play back a Sequence, press PLAY. If you programmed a countdown (SEQUENCER
SETUP 6), the number of beats you programmed will elapse before playback begins. If
you programmed an External Clock input (SEQUENCER EXT CLK), the Play LED will
flash until the External Clock signal appears.
There are two ways to stop a Sequence from playing. To stop playback at the end of the
Sequence, press STOP once. To stop playback immediately, press STOP twice.
Stop
In addition to performing the functions described above, pressing STOP also determines
the end of the Sequence under the circumstances described in SEQUENCER DEFINE 3
(Sequencer Length).
Summary of Contents for EII+
