manualshive.com logo in svg

E-Mu EII+, Owner'S Manual

Discover the vast potential of the E-Mu EII+ sampler with our comprehensive Owner's Manual. This essential manual provides you with detailed instructions, tips, and tricks to unleash your creativity. Download your free copy now from manualshive.com, and embark on an extraordinary sonic journey with this iconic sampling machine.

Share
Download
background image

HARD DISK SUPPLEMENT 

 

© 1985, 1986, 1987 E-mu Systems, Inc.                                                                        Page 161 

 

3.   After all errors have been noted, press ENTER. The display now says: 

 

Write Error Log to 
Hard Disk? (Y/N) 

 

If you’re next operation is to format the Hard Disk, which happens 90% of the time, press 
NO. If the Hard Disk is already formatted, press YES to update the existing error log. In 
either case, you next have the option to write the error log to floppy disk when the 
display says... 

 

Write Err Log to 
Floppy? (Y/N) 

 

Make sure that your Hard Disk software floppy is in Drive 1, and then press YES. After 
formatting the Hard Disk, this software can then be loaded into the Hard Disk to create 
an up-to-date error log. 

 
 

SPECIAL 18 - AUTO HARD DISK BACKUP 

 
Enter the Special module and key in 18 to save everything on the Hard Disk to floppies. 
All you have to do is get your floppies ready, read the display, and follow instructions.  

 
(Someday, robots will do this type of thing...). 

 

SPECIAL 17 - COPY HARD DISK SOFTWARE 

 
This function is available primarily for updating the Hard Disk operating system as 
updates become available. 

 

1.   Enter the Special module and key in 17 with the keypad. The display says: 

 

Copy will Erase 
Memory OK? Y/N 

 

If you press YES and carry on with the software writing process. 

 

BE VERY CAREFUL

  

Triple check that the software being loaded on to the Hard Disk is the proper Hard Disk 
software. If you accidentally write non-Hard Disk software on to the Hard Disk, it will get 
amnesia and not even remember that it’s a Hard Disk. 

Summary of Contents for EII+



































































































































































































































Reviews:

No comments

Related manuals for EII+

Prime Tech H-066 User Manual preview
H-066
Brand: Prime Tech Pages: 6
Vaporesso VECO GO User Manual preview
VECO GO
Brand: Vaporesso Pages: 28
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Real-El M47 RGB User Manual preview
M47 RGB
Brand: Real-El Pages: 5
M-Audio OXYGEN PRO MINI User Manual preview
OXYGEN PRO MINI
Brand: M-Audio Pages: 54
Dakota Digital CRS-3000-3 Manual preview
CRS-3000-3
Brand: Dakota Digital Pages: 20
ProtoArc EKM01 Faq preview
EKM01
Brand: ProtoArc Pages: 2
Crux RVCFD-79 Manual preview
RVCFD-79
Brand: Crux Pages: 10
Autel MaxiTrip TP100 Manual preview
MaxiTrip TP100
Brand: Autel Pages: 26
Instant-Dict ED200 User Manual preview
ED200
Brand: Instant-Dict Pages: 229
Franklin Bookman BDK-1460 User Manual preview
Bookman BDK-1460
Brand: Franklin Pages: 24
Targus AKB35 User Manual preview
AKB35
Brand: Targus Pages: 10
Franklin Bookman Professor PLUS User Manual preview
Bookman Professor PLUS
Brand: Franklin Pages: 26
Franklin BOOKMAN III MWD-1450 User Manual preview
BOOKMAN III MWD-1450
Brand: Franklin Pages: 33
Gigabyte GK-K8000 User Manual preview
GK-K8000
Brand: Gigabyte Pages: 28
Gigabyte Aivia K8100 User Manual preview
Aivia K8100
Brand: Gigabyte Pages: 121
Trust KB-2800 Quick Manual preview
KB-2800
Brand: Trust Pages: 2
Trust 15906 User Manual preview
15906
Brand: Trust Pages: 47

Brands by name

Popular brands

Load more brands