13
Once you have connected the charger to a power source (use care to ensure proper polarity when
connecting the charger to the power source), its red LED will flash to indicate the charger has power
and is ready to begin charging. Connect the Li-Po battery pack to the charger using the specially
marked Balance Charge Lead exiting the battery pack and the connector labeled with 11.1V on the
charger. The connector is keyed to prevent reverse polarity connection.
When the battery is properly connected and charging normally, the red and green LED indicators
will glow solid. Once the battery has been fully charged, the green LED will go out, leaving just the
red LED glowing solid. The battery can now be removed from the charger and installed into the
Blade CP+ for flight.
Summary of Contents for Blade CP
Page 66: ...66 Notes ...
Page 67: ...67 Notes ...