DETECTION AND TROUBLESHOOT ERRORS & FAULTS
Various controls are available for safe operation of the appliance. The differences in the control values that
the system encounters during these controls are being performed will visually alert you on the LCD screen
on the control panel of the appliance (Figure 21). You can see detailed information about the error and
fault codes in the explanations in Tables 9 and 10.
The safety of the appliance has been provided in two types (For example F1 and F4 codes).
a) If an error condition occurs, your device will go into the lock position. In this case, the error code will
appear on the LCD screen to alert you. In this case, move the position selector to the “OFF-RESET” position
again after the summer or winter position and wait for 5 seconds. If the fault persists after you return to
the summer or winter position, consult our nearest E.C.A services.
b) In the event of a fault, the device will switch to the blocked position. If it is blocked (F2, F3, F5, F6 and
F7), the fault can not be reset and the cause of the fault must be eliminated.
25
Figure 18
Error Codes
F1- Overtemperature locking
