Hot Domestic Water
Enabled
Parameter Menu Setting
Enabled
LCD Screen:
You can see all the operation functions on the LCD screen of the control panel of the appliance. When
the appliance is turned off, there will be no image on the LCD screen. When your combi boiler is operat
-
ing in the central heating mode, the symbol “ ” will be displayed on the lower left corner of the LCD
screen and the water temperature in the central heating system will be displayed digitally.
OPERATING THE APPLIANCE
Winter Position:
Move the position selector switch to the winter position. (Figure 16) In this position
you can meet both your needs for the use of the central heating and hot water. Central system heating
temperature can be set between 30°C and 80°C by means of the central heating water tempera
-
ture-regulating switch and between 35°C and 64°C with the domestic water temperature-regulating
switch.
With the operation of the appliance, the LCD screen gets lightened, the appliance completes its prelim
-
inary checks and starts burner by igniting. In this way, the appliance gets activated to supply both
central heating and hot domestic water. During the opening of any faucet in the hot water usage
circuit, the appliance stops the central heating and gives priority to the use of hot water, when the
faucet is turned off, the central heating continues automatically.
If the central heating circuit and the hot water usage are not required when the boiler is in the winter
position, the “ ” and “ ” icons light up constantly on the screen. After setting the set temperature,
which will be done with the hot water usage switch or the central heating circuit switch, the set
temperature is displayed on the screen for 5 seconds.
Figure 16
23
Installation
Pressure Value
Central
Heating
Enabled
Figure 19
Central Heating or
Domestic Water
Flame Symbol
Fault
