INFORMATION
Information Required for Safe and Economical Use of Your Combi Boiler
• Insulation of your building is extremely important. Significant energy savings are achieved since heat
loss is minimized in double-glazed houses with their walls sealed, and sheathing done.
• The use of thermostatic valves in your radiators ensures that the room temperatures remain
constant and fuel efficiency is achieved.
• Throttling the radiator valves in the rooms that will not be used for a long time and keeping the
doors closed reduces the fuel consumption.
• If you use your combi boiler with a room thermostat, it keeps the room temperature at the level you
set and provides less fuel consumption.
• Closing the radiator tops and fronts with furniture-like things negatively affects hot air circulation,
thus preventing the environment from heating and increasing fuel consumption.
• If you are going to leave your appliance in operation late at night, keeping the temperature of the
central heating circuit low will provide saving.
• If you feel that the room temperature is high, the radiator valves should be throttled instead of
opening windows.
• If the electricity of your appliance is disconnected on cold days, freezing which may occur in your
installation or your combi boiler may damage your appliance or installation. To prevent this, you
should not disconnect the electrical power of your device, especially on cold days.
However, if you do not need heating (for example, if you go on a short holiday for 1-2 days), you need
to bring the appliance to the OFF position so that you can use it more economically.
In the OFF position only frost protection will be active. The rumors that the bill will come higher
because the gas is consumed more when the combi boiler is turned on and off, are wrong.
Remember that the most economical way to use is to keep your appliance in the OFF position if you do
not need heating.
* Responsibility for the inconveniences resulting from the use of different
brand thermostats will not be accepted.
* The room thermostat connection is visible on the electrical circuit
diagrams. (Page 5, Figure 1)
19
