Domestic Water
Temperature-Regulating
Switch
Central Heating Water
Temperature-Regulating
Switch
Position
Selector Switch
LCD SCREEN
1) Position Selector Switch
Turning your device on/off allows you to select and reset the summer/winter position.
Winter Position:
Turn the position selector switch to the symbol “ ” in the left direction. In this
position, you can provide that the central system does heating and at the same time your domestic
water gets heated.
Summer Position:
Turn the position selector switch to the symbol “ ” in the right direction. In this
position, you can only provide that your domestic water gets heated.
Shutdown Position:
Set the position selector switch to the “RESET/OFF” position. Operation of your
appliance will end in this position.
Reset Position:
When there is a fault in your appliance, a reset message will appear on the left side
of your LCD screen along with the “RESET” symbol. In this case, turn the position selector switch to
the “OFF - RESET” position and wait for 5 seconds, then switch it to the summer or winter position,
at which you want to make it operate. If the fault persists, repeat this operation several times.
If the fault still persists despite resetting, consult our nearest E.C.A services.
2) Central Heating Water Temperature-Regulating Switch
You can select a comfort temperature you want from 30°C to 80°C by turning the central heating
water temperature-regulating switch between min. and max. while your position selector switch is in
the winter “ ” position.
3) Domestic Water Temperature-Regulating Switch
You can select a domestic water temperature between 35°C and 64°C by turning the domestic water
temperature-regulating switch between min. and max. while your position selector switch is in the
summer “ ” or winter “ ” position.
CONTROL PANEL
Ş
ekil 15
22
