manualshive.com logo in svg

Dynatronics Dynatron 550 Plus, Service Manual

The Dynatronics Dynatron 550 Plus is a cutting-edge medical device that provides effective therapy for muscle rehabilitation and pain management. Enhance your understanding of its features and operation with our comprehensive Service Manual, available for immediate download free of charge from manualshive.com. Get the most out of your Dynatron 550 Plus.

Share
Download
background image

Dynatron

®

 850plus & 550plus 

 

 

vii 

Current Limit ........................................................................................................................................ 93

 

Current Limit Warning ......................................................................................................................... 94

 

Microcurrent Usage Cautions.................................................................................................................. 95

 

Ultrasound Usage Cautions...................................................................................................................... 96

 

Applicator Movement........................................................................................................................... 96

 

Patient Susceptibility ............................................................................................................................ 96

 

Potential for Burns................................................................................................................................ 96

 

Output Power........................................................................................................................................ 97

 

Penetration of Ultrasound Waves ......................................................................................................... 97

 

Coupling ............................................................................................................................................... 97

 

Section V

 

Ultrasound Technical Information

 

Ultrasound Regulation............................................................................................................................ 100

 

Beam Profile ............................................................................................................................................ 101

 

Enter Soundhead Parameters ................................................................................................................ 104

 

New SmartHeads™ ............................................................................................................................ 104

 

Using Older Model Soundheads With the 50 Series Plus .................................................................. 104

 

Calibration Procedure ............................................................................................................................ 106

 

Problem Solving ...................................................................................................................................... 109

 

Soundhead Temperature Too Hot ...................................................................................................... 109

 

Cooling the Soundhead ...................................................................................................................... 109

 

Whirlpool Treatments......................................................................................................................... 109

 

Soundhead Temperature Too Cold..................................................................................................... 110

 

No Soundhead .................................................................................................................................... 110

 

Other Error Messages in the Display.................................................................................................. 110

 

Section VI

 

Technical Information

 

General Specifications ............................................................................................................................ 114

 

Dynatron 850plus and 550plus Specifications ................................................................................... 114

 

Stim Specifications............................................................................................................................. 114

 

Microcurrent Specifications ............................................................................................................... 114

 

High Volt Specifications .................................................................................................................... 115

 

Ultrasound Specifications (Dynatron 850plus only) .......................................................................... 115

 

Summary of Contents for Dynatron 550 Plus


























































































































































Reviews:

No comments

Related manuals for Dynatron 550 Plus

EASTERN INSTRUMENTS CentriFlow Manual preview
CentriFlow
Brand: EASTERN INSTRUMENTS Pages: 93
Pari Vortex Instructions For Use preview
Vortex
Brand: Pari Pages: 2
Hantek Tablet1000 Series User Manual preview
Tablet1000 Series
Brand: Hantek Pages: 98
LANGER EMV-Technik P1401 User Manual preview
P1401
Brand: LANGER EMV-Technik Pages: 25
Lang Electric Clamshell CSE12-208VCD Installation, Operation And Maintenance Instructions preview
Electric Clamshell CSE12-208VCD
Brand: Lang Pages: 16
Össur i-Digits Access Instructions For Use Manual preview
i-Digits Access
Brand: Össur Pages: 231
M-system M5XAMS Instruction Manual preview
M5XAMS
Brand: M-system Pages: 4
KAM Powercan15W Manual preview
Powercan15W
Brand: KAM Pages: 5
popular Little i-PEN Manual preview
Little i-PEN
Brand: popular Pages: 27
Meritor RS 120 Maintenance Manual preview
RS 120
Brand: Meritor Pages: 65
Biosonic Suvi Elite Quick Start Manual preview
Suvi Elite
Brand: Biosonic Pages: 2
Petzl NAVAHO BOD Instructions For Use Manual preview
NAVAHO BOD
Brand: Petzl Pages: 7
SHOWTEC RGB Studio Beam Driver Product Manual preview
RGB Studio Beam Driver
Brand: SHOWTEC Pages: 16
Steelcase Ology Walkstation 1451458001 Manual preview
Ology Walkstation 1451458001
Brand: Steelcase Pages: 38
DC Med IFU-1701 Instructions For Use preview
IFU-1701
Brand: DC Med Pages: 2
American DJ Quadra Force/Sys User Instructions preview
Quadra Force/Sys
Brand: American DJ Pages: 1
Sunrise Medical DeVilbiss 119 Instruction Manual preview
DeVilbiss 119
Brand: Sunrise Medical Pages: 9
Tektronix P5205 Instruction Manual preview
P5205
Brand: Tektronix Pages: 54

Brands by name

Popular brands

Load more brands