Dynapac V5100TV, Operation & Maintenance Manual

Page: 109 / 152

E 23
5 Adjusting extendable parts
To ensure that the screed lays without
marks and the extendable parts can also
be adjusted to the various operating
conditions during use, the height of the
extendable parts can be adjusted.
A
The approach angle of the extendable
parts is pre-set in the factory.
Two spindles, with which the positioning
angle of the extendable parts can be ad-
justed in relation to the main screed with
a ratchet, are located on each extenda-
ble part.
The extendable parts are adjusted at the
factors in such a way that they are 3 mm higher on the inner and outer side than the
main screed. The scales (1) are set to "0" with this adjustment.
5.1 Setting the height of the extendable parts
If the extendable screed parts do not lay without marks, this can be corrected during
laying.
Turning the spindle (2) counter-clockwise with the ratchet lifts the extendable screed
parts. Turning clockwise lowers the extendable screed parts.
Anstell.tif
2
1