Dynapac V5100TV, Operation & Maintenance Manual

Page: 71 / 152

D 33
Item Designation / function
100
- Screed section selection
A
For selecting the screed sections for temperature display and adjustment.
A
The temperature is adjusted for all sections together.
101
- "Energy saving" selection
A
To reduce the heater output if the generator output is insufficient.
A
After switching on, the "Energy saving" status (ON/OFF) set during previous
operation is assumed again.
102
- Plus button
A
To adjust the temperature.
103
- Minus button
A
To adjust the temperature.
104
- Enter
A
To confirm the input / temperature change.
105
- Standby
A
To switch between standby off / standby on.
106
- Screed section display
A
Displays the selected screed section. The temperature of the selected
screed section is shown in display (8).
A
If no button has been pressed for a long time, the display is off, and the mean
temperature value for all screed sections is shown in display (8). Return to
the basic status takes place after 3 seconds without button actuation.
107
- Temperature gauge
A
Displays the temperature of the selected screed section.
A
If no screed section has been selected or no button has been pressed for a
long time, the mean temperature value for all screed sections is shown.
Return to the basic status takes place after 3 seconds without button actua-
tion.