Dynapac ICA362, Instruction Manual

Page: 92 / 121

Maintenance, 10h
ICA362-4EN3.pdf 2012-06-12
Brakes - Check
Check the brakes by carrying out the following : Check the brakes by carrying out the following :
Checking the emergency stop
Fig. Control panel
1. Emergency stop
2. Forward/Reverse lever
1
2
Operate the roller slowly forwards. Hold the steering
wheel firmly and brace yourself for a sudden stop.
Push in the emergency stop (1). The roller will stop
abruptly and the engine will switch off.
After checking the emergency stop, set the
forward/reverse lever (2) in neutral.
Pull up the emergency stop (1). Start the engine.
The roller is now ready for operation.
Checking the parking brake
Fig. Control panel
1. Parking brake knob
2. Forward/Reverse lever
1
2
Operate the roller slowly forwards. Hold the steering
wheel firmly and brace yourself for a sudden stop.
Activate the parking brake knob (1). The roller will stop
immediately with the engine running.
After checking the parking brake, set the
forward/reverse lever (2) in neutral.
Reset the parkering brake knob (1).
The roller is now ready for operation.
See also Operating section in the manual.
82