Dynapac ICA362, Instruction Manual

Page: 101 / 121

Maintenance - 250h
ICA362-4EN3.pdf 2012-06-12
Drum cartridge - Checking the oil level
Fig. Left drum side
1. Indicator pin
1
Position the machine level so that the indicator pin (1)
on the inside of the drum is aligned with the top of the
drum frame.
Fig. Right drum side
1. Filler plug
2. Drain plug
3. Level plug
1
2
3
Wipe clean the filler plug (1) and level plug (3).
Unscrew the filler plug (1).
Fig. Drum cartridge
2. Drain plug
3. Level plug
2 3
Then loosen the level plug (3) on the underside of the
cartridge and unscrew it until the hole in the middle of
the plug becomes visible.
Top off with oil through the filler plug (1), until oil
begins to run out from the level plug's (3) hole. The
level is correct when it stops running.
Ensure that only MOBIL SHC 629 is used in the
cartridges.. Ensure that only MOBIL SHC 629 is used in the
cartridges..
Do not overfill with oil - risk for overheating. Do not overfill with oil - risk for overheating.
Clean and refit the plugs. Now repeat the procedure
on the opposite side.
91