Dynapac ICA362, Instruction Manual

Page: 87 / 121

Maintenance, 10h
ICA362-4EN3.pdf 2012-06-12
Maintenance, 10h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified. Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Scrapers - Check, adjustment
It is important to consider movement of the drum
when the machine turns, i.e., the scrapers can be
damaged or wear of the drum may increase if
adjustment is made closer than the values stated. It is important to consider movement of the drum
when the machine turns, i.e., the scrapers can be
damaged or wear of the drum may increase if
adjustment is made closer than the values stated.
Fig. Scrapers
1. Scraper blades (x4)
2. Screws
1
2
If necessary, adjust distance to the drum as follows:
Loosen the screws (2) on the scraper attachment.
Then adjust the scraper blade (1) to 20 mm from the
drum.
Tighten the screws (2).
Repeat the procedure for the other scraper blades (x4).
77