Dynapac ICA362, Instruction Manual

Page: 103 / 121

Maintenance - 250h
ICA362-4EN3.pdf 2012-06-12
Rubber elements and fastening screws - Check
Fig. Drum, vibration side
1. Rubber element
2. Fastening screws
1
2
Check all rubber elements (1), replace all of the
elements if more than 25% of them on one side of the
drum are cracked deeper than 10-15 mm (0.4-0.6 in).
Check using a knife blade or pointed object.
Check also that the screw fasteners (2) are tightened.
Battery - Check electrolyte level
Fig. Battery shelf
1. Quick-screws
2. Battery cover
3. Battery
1
1
2
3
Never use a naked flame when checking the
battery as the electrolyte emits explosive gas while
the alternator is charging. Never use a naked flame when checking the
battery as the electrolyte emits explosive gas while
the alternator is charging.
Lift up the engine compartment cover and undo the
quick-release screws (1).
Raise the battery cover (2).
Wipe the top of the battery.
Wear safety goggles. The battery contains
corrosive acid. Rinse with water if electrolyte
comes into contact with the body. Wear safety goggles. The battery contains
corrosive acid. Rinse with water if electrolyte
comes into contact with the body.
93