Dynapac ICA362, Instruction Manual

Page: 115 / 121

Maintenance - 2000h
ICA362-4EN3.pdf 2012-06-12
Maintenance - 2000h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified. Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning. Ensue that there is good ventilation (air
extraction) if the engine is run indoors. Risk of
carbon monoxide poisoning.
Hydraulic reservoir - Oil change
Fig. Underside of hydraulic reservoir
1. Drainage tap
2. Plug
1
2
Obtain a container for collecting the used fluid. The
container should be able to hold at least 60 liters (16
gal).
Observe care when draining hot hydraulic fluid.
Wear protective gloves and goggles. Observe care when draining hot hydraulic fluid.
Wear protective gloves and goggles.
A suitable container may be an empty oil drum or
similar item which is placed beside the roller. The fluid
then runs in a hose from the drainage plug (1) to the
oil drum, after the plug (2) has been removed and the
tap opened.
Save the oil and dispose of it in an approved
manner. Save the oil and dispose of it in an approved
manner.
Fill up with fresh hydraulic fluid as per the instructions
under the heading "Hydraulic reservoir - Check fluid
level". Replace the hydraulic fluid filters at the same
time.
Start the diesel engine and operate the various
hydraulic functions.
Check the fluid level and top up if necessary.
105