Dynamax Inc
8
1.1.2 List of Tools required
Hardware supplied by the user
2” metal pipe, 4’ long (or) other compatible mounting pole/ tower
A general list of tools required
Shovel – or post hole digger
Large bucket or container to mix concrete
12” pipe wrench
Teflon tape or pipe dope
Small sledge hammer
12’ tape measure
Felt-tipped marking pen
Open-end wrenches: 3/8”, 7/16”, ½”, 9/16”
Socket wrench and 7/16” deep well socket
Level (12” – 24”)
5/64” Allen wrench
Straight-bit screwdrivers (small, medium)
Magnetic compass
Volt/ Ohm meter
Wire ties and tabs
Conduit and associated tools as required for optional sensors
6’ ladder
Lock and key for enclosure
Installation supplies needed:
2” metal pipe, 6’ long, threaded on one end for 2 in pipe thread.
Concrete (quick set) mix to secure the vertical pipe, and fill a 4 ft hole (1-2 bags). 2-4 gals water
as recommended by concrete mix.
Wooden stakes with tape, or bricks / rocks to hold the pipe vertically while setting.