Dynamax InteliMet Advantage 6 User Manual Download

Page: 59 / 62

Features

InteliMet Advantage 6

Weather Station

The InteliMet Advantage 6 is a complete ETp

(Evapotranspiration) weather station which included the

DynaLog200 data logger and the MaxiMet 600 compact

weather station kit, which includes an optical rainfall

sensor. This rain sensor has no moving parts, so needs very

little maintenance. The system comes with all software for

programming, data collection, and calculation of ETp. A

battery and solar panel, grounding kit, and lightning rod

kit are also included. The InteliMet 6 is low-cost, research

grade, weather station ideal for research, commercial, or

agricultural applications. Comes ready to mount on a 2”

rigid pipe, or tripod.

Simple one-pipe, and one-crossbar construction installs

in under 30 minutes. The sensors require no wiring and

minimal assembly tasks with simple hand tools.

Logger, battery and data retrieval software are included

and ready to go. Data may be retrieved by a PC, a portable

PDA or by long distance communication options. All parts

and cables are supplied except for a 10 ft. base pole (a

standard 1 in. water pipe) in a cement footing. The crossbar

system installed 6 ft. high is light and strong. We supply all

the unique parts and let you save money on a costly tripod

or tower.

1 in. x 3 ft long pole and cross-arm give flexibility and is

easy to mount on any 2” pipe or tower with pipe adapters

and mounting hardware supplied by Dynamax.

Dynamax proprietary software records data from the

innovative Gill MaxiMet™ GMX600 and a reliable radiation

sensor for plant or crop weather applications. The

station internally calculates ETo evapotranspiration from

the most advanced solution prepared by the Texas A&M

University research staff to enhance the accuracy of prior

ET computations, (Lascano, Van Bavel – A.S.A. 2006).

MaxiMet™

MaxiMet is an advanced compact weather station designed

and manufactured by Gill Instruments using proven

technology to measure meteorological and environmental

parameters to international standards. MaxiMet

incorporates all the measurement parameters that meet

the requirements of users in demanding applications where

cost, quality and performance are essential.

MaxiMet 600 Compact weather

station

Optical Rain Gage Included

Wind Speed & Direction

Measurement

Air Temperature Measurement

Relative Humidity Measurement

Barometric Pressure Measurement

Solar Radiation Measurement

Dew Point Measurement

Lightning rod

10 W Solar Panel Included

CR200 data logger

512 kB of storage

Summary of Contents for InteliMet Advantage 6































































Search results

Summary of Contents for InteliMet Advantage 6

Reviews:

Related manuals for InteliMet Advantage 6

Brands by name

Popular brands

Dynamax InteliMet Advantage 6, User Manual

Search results

Summary of Contents for InteliMet Advantage 6

Reviews:

Related manuals for InteliMet Advantage 6

Brands by name

Popular brands