manualshive.com logo in svg

Dynamax InteliMet Advantage 6, User Manual, Page: 42 / 62

Share
Download
Dynamax InteliMet Advantage 6 User Manual Download Page 42

Intelimet Advantage 6 

 

 41 

 

4.6  Sensor Constants 

 

A basic InteliMet Advantage 6 weather station is supplied with the following sensors,  

 

GMX600  

Integrated weather transmitter 

PYR-P  

Pyranometer 

 

GMX600  is  factory  configured  for  use  with  InteliMet  Advantage  6  weather  station.  Similarly 
PYR-P pyranometer sensor is factory configured to read global solar radiation in W/m2. All PYR-
P  sensors  are  factory  calibrated  for  a  multiplier  of  5.00.  Hence  it  is  not  necessary  to  make  any 
changes to the pyranometer settings. 

 

In addition to the basic sensors, InteliMet Advantage 6 weather station can be added with optional 
sensors such as  

 

Soil Moisture sensor (SM300) 

Soil temperature sensor (109) 

Quantum Sensors (QSO) 

 

In the case of optional sensors it may be necessary to enter constants for those sensors. Please refer 
to  the  documentation  supplied  with  the  custom  sensors  for  constants  and  programming.  An 
example of how to change the constants for soil moisture sensor (SM300) is explained below. 

 

Soil  moisture  sensor  SM300  measures  %  soil  moisture  by  volume  in  the  sample.  The  sensor 
measures  voltage  output  that  is  proportional  to  the  dielectric  constant  of  the  soil.  This  voltage 
output can then be converted to %SM using a multiplier and an offset representing the type of soil. 
The following table lists the multiplier and offset for mineral or organic soil. 

Linear constants 

 

Slope 

Offset 

Mineral Soil 

0.059788 

3.87 

Organic Soil 

0.066439 

6.995 

 

Identify  the  type  of  soil  and  corresponding  slope  and  offset  from  the  table  above.  Open  the 
program  IMET_MP2_Main.CR2  or  other  program  if  saved  in  a  different  name  in  CRBasic. 
Identify the SM300 constants at the top of the program after the system constants as shown below. 

 

These constants are, 

Summary of Contents for InteliMet Advantage 6































































Reviews:

No comments