Dynamax Inc
46
5.2 Connect To Logger
PC200 saves data logger setting once added in the software for future connections. A list of stations
with name assigned is displayed in the
Setup/ Connect
tab of PC200 software as shown in the figure.
A summary of the previously assigned settings in the software is displayed on in this window as
shown below. Click on a station to view the settings previously entered to that particular station. To
change or edit a station’s settings simply click Edit button while the station is selected.
To connect to a logger for setting up program or data retrieval, simply select the station name and
click on
Connect
button.
If the connection is successful Connect button changes to
“Disconnect”
and Connection time is
displayed at the bottom right corner indicating software is currently connected to the data logger.
If data logger clock and PC clock are different select
Offset
and click
Set Clock
to update data logger
clock.
Click command button
Select and Send Program
to send a new program to the logger.
