Operation
6 — 3
05_0128_0609GB
For cleaning work, proceed as follows:
Danger
Wear all necessary protective equipment. This also applies for all
personnel standing within the operating area of the machine (for their
own safety).
Never direct the water jet at people or animals.
Pay attention to the confines of the danger area when performing
work involving high-pressure water jets. No personnel apart from the
machine operator should stand within a 10 m radius of the high-pres-
sure gun.
When operating the high-pressure gun, always hold firmly with both
hands.
Place one hand on the high-pressure gun trigger and the other hand
on the insulated section of the high-pressure pipe.
The high-pressure gun produces recoil and torque when activated.
Ensure equipment is secure and stable.
Do not crush high-pressure hoses or guide them over sharp edges.
Avoid tensile and bending stress.
The engine is switched on at the main switch and the star-delta
switch.
Your machine may also be fitted with an automatic star-delta switch,
depending on the model.
Caution
The delivery side must be fully open when the engine is started, i.e.
press the high- pressure gun trigger.
This fills the pump more quickly and avoids dry runs.
Continued on following page
6.3
High-pressure cleaning
Starting the engine
