Safety Regulations
2 — 12
03_0026_0603GB
During the following operating modes at the machine:
-- Set-up
-- Starting up
-- Operation
-- Cleaning, Troubleshooting, Maintenance
-- Decommissioning
there is a risk of injury through crushing or knocking.
The machine does not have any attachment points and should there-
fore loaded onto a suitable transport aid (Euro pallet). If you need to
hoist the machine and its transport aids, use a suitable crane with
lifting gear for the pallet or a suitable fork-lift truck.
Danger of crushing
Lift the machine carefully with a fork-lift truck and move with great
care.
When lifting with the crane, determine the centre of gravity of the ma-
chine by lifting carefully. All cables or chains on the lifting gear must
be tensioned evenly and the machine must be raised evenly at all
support points.
The machine must only be loaded onto a suitable transport vehicle
and must be secured against rolling, sliding and overturning during
transport.
Suspended Load
Hoisted loads may fall if they are not loaded properly or if the auxi-
liary loading equipment is damaged.
Ensure no persons are under a suspended load.
Only use a slinging bear with a loadbearing capacity designed to
support the gross weight of the machine.
2.10 Risk of crushing and
knocking
Transporting the ma-
chine
