Operation
6 — 7
05_0016_0608GB
After completing your work, clean the machine, the high-pressure
gun and the high-pressure hose. This ensures that the machine will
function correctly the next time it is used.
Prior to cleaning the machine, cover or seal all openings where
moisture should not enter for safety or operating reasons. Especially
at risk are electric motors, control cabinets and electrical plug
connectors.
Note
In the first four operating weeks clean all painted surfaces with cold
water with a maximum water pressure of 5 bar only. Do not use any
aggressive cleaning additives. Only after this time will the paint have
hardened completely, allowing you to use steam jet equipment or
similar tools.
Under no circumstances use sea water or any other salty water for
cleaning purposes. Should sea water get onto the machine you must
rinse it off without fail.
1
2
Item
Designation
1
Control cabinet
2
Engine
6.6
Cleaning the machine
Information on cleaning
