DynaGen TG410, User Manual

Page: 27 / 67

Settings
26
© 2017 DynaGen Technologies Inc TOUGH Series Manual
4 Settings
The following section relates to settings that can be changed to alter the way the controller performs its functions. Read and review
these sections carefully to ensure your settings are set correctly for your engine.
4.1
Operator Setup
The following settings are used to change the way the user interacts with the controller. They are not password protected and can
be changed by anyone from the front panel.
Name Range Description
Lamp Test Function Performs a lamp test on the LEDs when selected.
Display -> LCD Reverse Function Reverses the white and black pixels when selected.
Display -> LCD Contrast 5 ~ 95% Changes the contrast of the LCD.
Display -> Page Scroll 1 ~ 10 seconds Amount of time between each auto scroll of the parameter
pages.
Display -> Message Pop-Up 1 ~ 10 seconds Amount of time each message is displayed on the screen
before displaying next message in the buffer.
Display -> DPF/DEF Display Time 0 ~ 10 seconds See DPF/DEF aftertreatment in the J1939 Reference Manual for
more information.
Display -> LCD Backlight Timeout 10 ~ 600 seconds Amount of time the LCD Backlight stays on after button activity
stops.
Date / Time -> Date Change 1 ~ 31 days
1 ~ 12 months
2000 ~ 2099 years Sets the date.
Date / Time -> Time Change 0 ~ 23 hours
0 ~ 59 minutes
0 ~ 59 seconds Sets the time.
Date / Time -> Daylight Savings Enable ~ Disable Turns Daylight Savings Time on or off. This applies to North
America only. Disable for other locations.
Units -> Temperature Unit °F or °C Selects the temperature display format.
Units -> Pressure Unit PSI or kPa Selects the oil pressure display format.
Run from OFF Enable ~ Disable When enabled, allows a user to start the engine using the run
button while in the OFF mode. When disabled the controller
must be placed in AUTO mode before the run button can start
the engine.