15
UVCS LED Light-Curing Conveyor Systems User Guide
Figure 19. Install 4 Screws
Figure 20. Closeup of Screw
Wiring LED Control Switch
To control the BlueWave® AX-550
’s
ON and OFF states for irradiation, connect the trigger wires from the
LED control switch to the TRIGGER pins on the BlueWave® AX-550
’s t
erminal block trigger input. The
terminal block has friction lock wire interface that will accept the crimped ferrule installed on the LED
control wire assemblies by pressing them firmly into place.
Figure 21. Insert Ferrule into Terminal
Figure 22. To Remove a Wire, Use a
Small Screwdriver to Depress the Orange
Lock Tab and Remove the Wire
Terminal Block
