10
UVCS LED Light-Curing Conveyor Systems User Guide
Two Flood System
Two flood system configurations use a dual-emitter base structure to provide the best uniformity of UV
energy at the target. The dual emitter can be configured in perpendicular or in-line with the conveyor
travel direction.
In-Line Dual Emitter
1.
Align the emitter base with the cradle opening and lower into place. Insert the supplied screws
and tighten with the hex wrench at four locations.
Figure 6. Lower Emitters into Cradle and Install the Four Screws
2.
Next, lower the controllers onto the dual-emitter base, one at a time. Then, fasten each
controller to the emitter base with two screws on each end, using the supplied hex wrench.
Figure 7. Install the Controllers onto to Dual-Emitter Base
