Using T
his Pr
oduct
Ins
talling T
his Pr
oduct
40
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
CAUTION
When removing the filter, be sure to close the water
shutoff valve. When installing the filter, tighten it fully
until the line is out of sight inside the seat unit.
* Failure to do so could result in water leakage.
2. Drain the water from the tank using
the flush lever.
Draining the water and disconnecting the power
1. Close the water shutoff valve to stop
the flow of water.
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
5. Remove the warm water tank drain
plug and drain the water from the
warm water tank
.
1) Loosen the water drain plug on the seat unit
of this product by turning it counterclockwise
90 degrees.
4. Drain the water from the water
supply hose.
1) Place a wash bowl or similar container
underneath the filter.
2) Remove the filter with a screwdriver or similar tool.
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
3) Remove the seat unit from the toilet. See
page 14.
4) Tilt the seat unit and drain out the water
from inside the seat unit water supply
hose through the filter installation
opening
.
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
3. Remove the power plug from the wall
outlet.
Water shutoff valve
Turn clockwise.
Filter
Turn
counterclockwise.
Filter
Water
supply
hose
Turn counterclockwise 90°
Turn clockwise 90°
Warm water tank
drain plug
Tighten the strainer
until the line is out of
view inside the seat unit.
Line
5) After draining out the water, close the
filter tightly using a screwdriver.
2) Pull out the water drain plug, tilt the seat
unit forward, and drain all the water from
the warm water tank.
3) After draining the water, turn the water
drain plug clockwise 90 degrees to close
it.
4) Install this product onto the toilet bowl.
(See page 37.)
Do not attempt to drain the water from this
product with the seat unit in this position.
* Water could penetrate inside the
mechanism and cause damage.
CAUTION
6. Prior to using the toilet again, be sure
to perform an operational check. See
page 18
.
WARNING
When not using this product for an extended period of time,
be sure to drain the water from this product.
* The water in this product could freeze and cause damage,
resulting in electric shock, fire and water leakage.
* The water could become dirty and cause skin inflammation.
If this product will not be used for an extended time, follow these procedures to drain the water
from this product.
Draining This Product During Periods of Extended Disuse
CAUTION:
Water left in this product for an extended period can become contaminated and clog this
product, or it can freeze. In either case, this product could be damaged.
