Using T
his Pr
oduct
Ins
talling T
his Pr
oduct
31
If the "LO" setting for the bidet spray is still too strong, adjust the water pressure
even lower by performing the following procedure.
Turning the water pressure even lower.
•
Press the Bidet button and the Power Save ON/
OFF button simultaneously for 2 seconds.
The power LED located on the seat unit flashes
momentarily and the water pressure will be set
one step lower.
Two lower settings are available. Adjust the
spray to your preferred strength.
* In places with low tap water pressure, the
nozzles may not extend or it may take
longer than usual for the nozzle to extend,
when the water pressure is set to the lowest
setting.
The water pressure is lowered one
step each time the buttons are
pressed.
The original water pressure will
be restored the third time this
procedure is performed.
•
In order to return to the original water pressure, repeat the process of pressing the Bidet
button and the Power Save ON/OFF button simultaneously for 2 seconds. The system returns
to the original water pressure after the third time this procedure is performed.
The strength of the bidet spray function can be set even higher by performing the following
procedure.
For persons who would like to turn the water pressure higher
•
Press the Cleansing button and the Power Save
ON/OFF button simultaneously for 2 seconds.
The power LED on the seat unit flashes
momentarily and the water pressure will be set
one step higher.
•
To restore the original water pressure, press the Cleansing button and the Power Save ON/
OFF button simultaneously for 2 seconds.
The power LED on the seat unit blinks momentarily each time the buttons are pressed.
Setting and canceling
Setting and canceling
Press the buttons simultaneously for 2 seconds.
To set the water pressure lower, press the
buttons simultaneously for 2 seconds.
