Using T
his Pr
oduct
Ins
talling T
his Pr
oduct
43
Rear cleansing and front cleansing (continued)
Warm air drying
Spray water is not
warm.
Water temperature is not set
to an appropriate temperature.
Adjust the water temperature to the
appropriate level. See page 25.
The Cleansing or bidet
function was used for a long
period of time.
The water takes about 3 minutes to
warm back. See page 23.
Power save is activated.
Disable power save. See page 29.
Cause
Remedy
Symptom
Drying function does
not operate.
The seat sensor is not on.
Sit back fully on the toilet seat, or change
the way you sit on the toilet. See page 23.
Certain clothing is difficult for
the seat sensor to detect even
if the seat is occupied.
Place your hand close to the seat sensor.
See page 23.
Dryer air is not warm.
Air temperature is not set to an
appropriate level.
Press the Dryer button and set the air
temperature to the appropriate level. See
page 28.
Warm air stops
suddenly before
finishing.
The drying function has been
used for 4 minutes or longer.
Press the Dryer button again. See page 28.
Cause
Remedy
Symptom
Deodorizing
The deodorizing fan
does not switch off.
Is any paper covering the seat
sensor?
Please remove any paper blocking the
seat sensor.
Cause
Remedy
Symptom
Heated toilet seat
The toilet seat is not
warm.
Seat temperature is not set to
an appropriate level.
Adjust the seat temperature to the
appropriate level. See page 25.
Power save is activated.
Disable power save. See page 29.
After sitting for a while,
the toilet seat begins
to cool off.
The seat heater auto off function
is operating.
Disable the toilet seat heater auto-off
function. See page 30.
Cause
Remedy
Symptom
