DXV AT100 Installation & User Manual Download

Page: 37 / 48

Using T

his Pr

oduct

Ins
talling T

his Pr

oduct

Wipe off here.

Turn

counterclockwise.

" " mark on the

mounting plate

Protrusion on the

rear of the seat unit

When cleaning the toilet bowl,
take care not to splash the seat
unit with detergent. Before
installing the seat unit, wipe the
detergent off from the toilet bowl
using a cloth damped with water.

* Leaving detergent on the seat unit

may lead to product failure.

Do not put your hand or any
object inside the air outlet or
around the nozzle.

* Doing so may injure your hand or

lead to product failure.

Wipe the seat unit clean using a

soft cloth dampened with water.

Wipe off here.

Turn

counterclockwise.

" " mark on the

mounting plate

Protrusion on the

rear of the seat unit

Wipe off here.

Turn

counterclockwise.

" " mark on the

mounting plate

Protrusion on the

rear of the seat unit

1. Place the seat unit on the toilet bowl. Align the inverted

triangle mark ( ) on the mounting plate with the

protrusion on the rear of the seat unit.

* See the user's manual for details on

cleaning the toilet bowl.

2. Cleaning

3. Assembling the Seat Unit

DANGER

Do not pour water or cleanser inside

this product. Do not splash water on

the seat unit or the power plug.

* There is danger of electric shock or fire.

Slightly raise the front of the seat.

Slide the seat on to the

mounting plate. Push the lock lever to secure the seat.

* If this product is not pushed all the way back, the lock

lever cannot be pushed back in.

After locking this product in place, shake it slightly back

and forth and left and right, making sure it has been

securely locked in place.

4. Insert the power plug into the outlet.

At this time, check to make sure the water temperature

and seat temperature indicator LEDs are illuminated.

Check that the seat unit has been completely locked in place.

* If not, the seat unit may slide off the toilet bowl.

Do not bend any hose using excessive force.

* Doing so may permanently deform it or cut off the water supply.

5. After completing the assembling, perform an

operational check. (See page 18.)

3. Open the water shut-off valve

to its original position and run

water through this product.

* Make sure water is not leaking
from any of the joints.

Wipe off here.

Turn

counterclockwise.

" " mark on the

mounting plate

Protrusion on the

rear of the seat unit

CAUTION

Summary of Contents for AT100

















































Search results

Summary of Contents for AT100

Reviews:

Related manuals for AT100

Brands by name

Popular brands

DXV AT100, Installation & User Manual

Search results

Summary of Contents for AT100

Reviews:

Related manuals for AT100

Brands by name

Popular brands