10
Figure 3
The DX Engineering Hexxagonal Hub is now ready for use as the solid foundation for your
HEXXAGONAL BEAM Mark 2
.
Working with Fiberglass
There are parts made from fiberglass in this kit. Take normal precautions when handling any fiberglass
material. There may be fiberglass dust, slivers or particles present when the fiberglass parts were
manufactured. The use of typical fiberglass handling safety gear (gloves, dust mask, eye shield,
clothing, etc.) when handling and working with fiberglass is recommended. Use a damp rag to wipe
the parts.
Do not
use compressed air to clean fiberglass parts. Measures can be taken to reduce
exposure after a person has come in contact with fiberglass. Eyes should be flushed with water and any
area of exposed skin should be washed with soap and warm water to remove fibers. Clothing worn
while working with fiberglass should be removed and washed separately from other clothing. The
washing machine should be rinsed thoroughly after the exposed clothing has been washed. Check with
your local or state safety and/or environmental agencies for more detailed precautions.
