7
DXE-HEXX-1WRP HEXXAGONAL BEAM 1-band Wire & Wire Guide
Qty
Description
2
20 Meter Wire Driven Element - #14 Copper Stranded Wire with Black PVC Insulation with Ring
Terminals attached and Wire Guides installed
1
20 Meter Wire Reflector Element - #14 Copper Stranded Wire with Black PVC Insulation with Ring
Terminals attached and Wire Guides installed
6
#10 hole, 16-14 Wire Gauge Ring Terminal
(Spares for various bands and/or adjustment in element lengths)
1
UHF Female-to-Female Adapter (dual SO-239 style)
1
Coax Wire Assembly, 10" with PL-259 and Ring Terminals
1
Single Band Feeder Insulator Clamp Assembly
6
Floating Wire Guides for 3/4" Spreader.
Parts required but not supplied
JTL-12555
- Jet-Lube SS-30 Pure Copper Anti-Seize
The above products are limited to domestic UPS Ground shipping only
Note: Jet-Lube SS-30 or Never Seez
®
should be used to prevent
galling (seizing) of stainless steel hardware.
TES-2155
- 3M Temflex™ 2155 Rubber Splicing Tape
TES-06132
- Scotch
®
Super 33+ Tape
The
DXE-FCC050-H05-A
- Feedline Current Choke and the
DXE-BMB-1P
Balun Mounting
Kit for a .750 in. thru 1.50 in. Boom
-
are suggested options and this manual describes their
installation.
Tools Required
1/4", 5/16", 3/8" and 7/16" Deep Well Nut Drivers and/or Open End Wrenches
Tape Measure, 50 ft
Step Ladder, 6 ft.
Use proper precautions for step ladder safety
Screwdriver
Pliers
Scissors
Lighter or flame source (to slightly melt the cut rope ends to keep them from fraying)
Use proper safety precautions for a lighter or flame producing item
Marking Pen or Pencil
Three foot Tripod and three foot mast pipe - To hold the antenna while under construction.
Manual Updates
Every effort is made to supply the latest manual revision with each product. Occasionally a manual
will be updated between the time your DX Engineering product is shipped and when you receive it.
Please check the DX Engineering web site (
www.dxengineering.com
) for the latest revision manual.
