ITVC Series – Intelligent Total Valve Controller IOM-ITVC-Basic-05
DVG AUTOMATION S.p.A.
Legal & Operative HQ: 29016 Cortemaggiore (Piacenza) Italy, Via G. Rossetti n° 2
Tel. (+39) 0523 255811; Fax (+39) 0523 255890;
Fully Paid In Capital: Euro 1.000.000,00=
ISO
9001, ISO 14001, OHSAS 18001
CERTIFIED
REA 167410 - VAT 01494460338
COMPANY SUBJECT TO MANAGEMENT AND COORDINATION BY G.I.V.A. S.P.A. WITH HEADQUARTERS IN RHO (MILAN), RECORDED UNDER NUMBER 02917180172 IN
MILAN'S REGISTER OF COMPANIES
www.dvgautomation.it
SHEET 26 DI 64
10.1 HOME page
In the normal operation the
HMI
display shows the
HOME page
. Depending on the ITVC configuration, three
different HOME pages are available. The presence of the optional battery is shown by the icon , on the high, left
corner of the display. The icon shows the battery charge level. The flashing icon shows the current position of cursor.
The default position of the cursor is on the icon of
ITVC status
, or or
.
HOME page “
Standard type
”
: it shows the
icons
of the
actuator control mode
(Local, Off, Remote),
valve
position
(open, close, intermediate),
ITCV status
(No Alarm and Warning, Alarm, Warning),
PST
function,
Line Break
function,
Optional battery, Setup and Measurement, Pressure measures
. The icons “Optional
battery”, “PST function”, “Line Break function”, “Pressure measures”, are visible only if the relevant functions
are active.
HOME page “
HPU type
”
: it shows the
icons
of the
actuator control mode
(Local, Off, Remote),
ITCV
status
(No Alarm and Warning, Alarm, Warning),
HPU pressure
,
HPU oil level
,
HPU motor status
,
PST
function,
Line Break
function,
Optional battery, Setup and measurement, Valve Position
. The icons “PST
function”, “Line Break function” and “Optional Battery” are visible only if the relevant functions are active. See
Annex C: HPU function
HOME page “
HIPPS type
”
: it used in HIPPS applications. The ITVC controls 2 actuators
A
and
B
. The
display shows the
actuator control mode
(Local, Off, Remote) of selected A or B,
valve position
(open, close,
intermediate) of both A and B,
ITCV status
(No Alarm and Warning, Alarm, Warning) of selected A or B,
PST
function,
Line Break
function,
Optional Battery
,
Setup and Measurement
,
Pressure measures
. The
icons “Optional battery”, “PST function”, “Line Break function” and “Pressure measures” are visible only if the
relevant functions are active. See Annex D: HIPPS function.
Position %:
Open:
100.0
Closed:
0.0
Intermediate (actuator
with Limit Switch):
…
Intermediate (actuator with
position sensor):
xx.x%
Or Line Break function
Actuator control mode REMOTE=REM, LOCAL=LOC, OFF=OFF
No Alarm, No Warning, Alarm= , Warning=
Setup and Measurement operation
A
HOME page
PST function
Optional battery
HOME page
Actuator control mode REMOTE=REM, LOCAL=LOC, OFF=OFF
No Alarm, No Warning, Alarm= , Warning=
A
PST function
Setup and Measurement operation
Or
Line Break function
Motor 1 status: ON=RUN, OFF=nothing
Working motor: 1 or 2
Oil level (if HPU has the level sensor)
HPU pressure and start and stop pressure
HOME page
PST function
Or Line Break function
Actuator control mode: REMOTE=REM, LOCAL=LOC, OFF=OFF
No Alarm, No Warning, Alarm= , Warning=
A
Setup and Measurement operation
Position actuator A
Position actuator B
Actuator selection: A or B
Optional battery
Optional battery
A
Next page = Pressure measure
Next page = Valve position
Switch to pressure measured page or
Switch to HPU data (if the icon is )
Summary of Contents for IOM-ITVC-Basic-05
Page 2: ......