ITVC Series – Intelligent Total Valve Controller IOM-ITVC-Basic-05
DVG AUTOMATION S.p.A.
Legal & Operative HQ: 29016 Cortemaggiore (Piacenza) Italy, Via G. Rossetti n° 2
Tel. (+39) 0523 255811; Fax (+39) 0523 255890;
Fully Paid In Capital: Euro 1.000.000,00=
ISO
9001, ISO 14001, OHSAS 18001
CERTIFIED
REA 167410 - VAT 01494460338
COMPANY SUBJECT TO MANAGEMENT AND COORDINATION BY G.I.V.A. S.P.A. WITH HEADQUARTERS IN RHO (MILAN), RECORDED UNDER NUMBER 02917180172 IN
MILAN'S REGISTER OF COMPANIES
www.dvgautomation.it
SHEET 49 DI 64
10.3.7.4.16
Stroke time calibration
The sub-menu starts the procedure that records the closing stroke time, by moving the valve. If the valve is open the
ITVC closes the valve. If the valve is closed the ITVC open the valve and then closes it. The function is available only
if the actuator control mode is “
LOCAL
” and the actuator is fitted with analogue position transmitter or limit switches
10.3.7.4.17
Test coil absorption
By this sub-menu the ITVC measures and records the current of each individual solenoid valve coil connected to the
ITVC. The measured values are used as
reference
current to check the status of solenoid coils in the sub-menu “
Coil
test
”. The function is available only if the actuator control mode is “
LOCAL
”.
Summary of Contents for IOM-ITVC-Basic-05
Page 2: ......
