ITVC Series – Intelligent Total Valve Controller IOM-ITVC-Basic-05
DVG AUTOMATION S.p.A.
Legal & Operative HQ: 29016 Cortemaggiore (Piacenza) Italy, Via G. Rossetti n° 2
Tel. (+39) 0523 255811; Fax (+39) 0523 255890;
Fully Paid In Capital: Euro 1.000.000,00=
ISO
9001, ISO 14001, OHSAS 18001
CERTIFIED
REA 167410 - VAT 01494460338
COMPANY SUBJECT TO MANAGEMENT AND COORDINATION BY G.I.V.A. S.P.A. WITH HEADQUARTERS IN RHO (MILAN), RECORDED UNDER NUMBER 02917180172 IN
MILAN'S REGISTER OF COMPANIES
www.dvgautomation.it
SHEET 35 DI 64
Position-Temperature- Voltage-Oil turbidity-Motor current-Oil level
-
Accu strok, Micro 2 alarms
If the measure is not done (since the sensor is not present or the ITVC does not manage the data) the
message of display is “NOT AVAILABLE”
To switch back to previous page of menu press simultaneously or by and move the cursor on
and then press
The option “
Accu Strok Avail
” reports the number of stroke that can be completed with the remaining pressurized
hydraulic oil in the accumulator and it is available only in the ITVC with HPU (
see Annex C: HPU control).
Instantaneous value of
oil turbidity
in ISO units.
It is available only in the ITVC with
HPU (see
Annex C: HPU control
)
Instantaneous value of
oil level
, in
percentage of full scale of level
sensor
It is available only in the ITVC with
HPU only if HPU has oil level
transmitter (see
Annex C: HPU
control
)
Instantaneous value of
current
consumption from main supply, in
ampere RMS.
It is available only in the ITVC with
HPU (see
Annex C: HPU control
)
Instantaneous value of
valve
position
in percentage of opening.
It is available only if the actuator is
fitted with analogue position
transmitter
Instantaneous value of
main
voltage
supply in volt.
It is available only in the ITVC with
HPU (see
Annex C: HPU control
)
Instantaneous values of
temperature
of Logic and Power
boards in °C
List of current microprocessor 2
alarms.
The list is automatically updated
Summary of Contents for IOM-ITVC-Basic-05
Page 2: ......
